The use of the motor of the track toy car mainly involves the installation of the battery, the connection of the line and the start of the motor. Here's a detailed guide:

1. Preparation

Check accessories: Make sure the track toy car and its accessories (such as batteries, wires, controllers, etc.) are complete and in good condition.

Choose a site: Lay the track on a flat, dry and safe site to avoid sharp objects or places where it is easy to slip.

Second, battery installation

Choose the right battery: According to the instructions of the toy car, choose the battery type and specifications that meet the requirements. Usually, rail toy cars use rechargeable nickel-metal hydride batteries or alkaline batteries, such as AA or AAA models.

Battery installation:

Open the battery compartment cover on the bottom of the toy car.

Put the battery into the battery compartment correctly according to the positive and negative electrodes (usually positive "+" facing up and negative "-" facing down).

Make sure the battery is securely placed in the battery compartment and the battery compartment cover is closed.

Third, line connection

Check the wires: Make sure the wires are not damaged and the joints are tightly connected.

Connecting the battery to the motor:

Use hard wires (such as copper wires) to connect the positive and negative electrodes of the battery to the corresponding interfaces of the motor. Note that the connection of the wire should be firm to avoid loosening or short circuit.

If the toy car is designed with a controller, it is also necessary to connect the controller's wires to the motor and battery.

4. Start-up and operation

Check connections: Before starting, double check that all connections are secure to ensure that there is no short circuit or poor contact.

Turn on the power: If the toy car is designed with a power switch, turn it on. At this time, the power indicator should be on, indicating that the power supply is connected.

Start the motor: Press the start button on the toy car (or the start button on the remote control, if equipped with a remote control), and the motor should start running, driving the toy car on the track.

Control speed: If the toy car is designed with a speed control function (such as fast forward, slow forward, etc.), the speed of the toy car can be adjusted by pressing the corresponding button.

Pay attention to safety: During the driving of the toy car, pay attention to observe its operation to avoid accidents such as collisions or tipping over. Also, make sure there are no objects around that could be harmed, such as children or pets.

Maintenance and maintenance

Regular cleaning: Use a soft cloth or paper towel to wipe dust and dirt from the toy car surface and track.

Check the battery: Periodically check the battery power and performance to ensure that the battery can supply power normally. If the battery leaks or the skin is damaged, replace the new battery in time.

Storage precautions: When the toy car is not in use, it should be stored in a dry, ventilated and cool place to avoid direct sunlight and wet environment to cause damage to the toy car.

Through the above steps, you can properly use the track toy car motor and enjoy the fun brought by the toy car.